Playbooks

Breakdown

Mtn Mesh Y-Post lines up out of Shotgun 5WR Trio and features a classic mesh combo underneath with a post shot over the top. The two inside receivers cross low at the same depth to create the mesh traffic for man coverage, one shallow crosser continues into the mesh while the other works to the opposite flat, and the backside receiver runs a deep post that stretches the middle of the field vertically. This is a man beater built to use natural rubs from the mesh to spring someone open underneath while the post gives you a big play window if the safety bites on the crossers.

Defensive Reads

Pre-snap, check safety depth and alignment, a single high safety rotation tells you the post has a numbers advantage over the top. Watch cornerback press versus off alignment on the outside receivers, press man is a green light for the mesh to create natural picks and separation. Post-snap, key any user-controlled linebacker or safety flowing hard to the mesh crossers, that flow opens the post route behind them. Against zone shells like Cover 3 or Cover 4, the mesh routes will bunch up in the same underneath zone and get sat on, so bail to the post or a checkdown instead of forcing the crossers. Watch for a blitz off the edge since the mesh takes time to develop, if the protection breaks down get the ball out to the shallow crosser immediately.

Usage Tips

Use pre-snap motion if available to identify man versus zone before the snap, since the mesh concept only creates real separation against man defenders. If you see two high safeties, prioritize the post route in rhythm since a single high safety will struggle to cover both the mesh and the vertical shot. On third and medium, let the mesh routes work first and only go to the post if you see the defense over pursue the crossers with a linebacker or safety. Pair this call with Mtn Y Shallow Cross or Shallow Cross earlier in a series so defenders start jumping the shallow crossers, then hit them with the post route for a home run once they bite. Hot route the flat receiver into a quick out if you are facing a hard blitz look, since that gives you an outlet before the mesh fully develops.